Siphon pumps Heavy
£12
Fits 205 L
Capacity 21 LPM
Bung 2" use with drums
Discharge hose length 1,2 m
Easy to use, polyethylene pump siphon liquids to
lower levels than the height at which the pump is
installed
Easy to prime and start within 6-7 strokes.
Pump requires no further operation and keeps
working in Auto position
Equipped with a Vent Cap on top.
Opening the cap stops discharge
To dispense media at levels higher than the pump,
pump below needs to be continuously operated
Supplied complete with flexible corrugated discharge
tube
- Secure payment by card
- E-mail us, we reply swiftly!
- These rows can be edited \*
\* Edit these rows under Content > Article page
Description
Article no.: 21316
Recommended use: Water-based fluids, detergents,
waxes, soaps, antifreeze, some mild acids and other
liquids compatible with pump construction materials
Pump should only be used with light weight and
non-flammable liquids
Do NOT use with any media not compatible with
materials used in the pump construction
Warning
Pumps must never be used with Hot Media at
temperatures above 60° C
These pumps must never be used with concentrated
acids, Acetone, Petrol etc
waxes, soaps, antifreeze, some mild acids and other
liquids compatible with pump construction materials
Pump should only be used with light weight and
non-flammable liquids
Do NOT use with any media not compatible with
materials used in the pump construction
Warning
Pumps must never be used with Hot Media at
temperatures above 60° C
These pumps must never be used with concentrated
acids, Acetone, Petrol etc