Siphon Pump
£2.50
Barrel size: 20-50 L Capacity: 6.5 l/m Outlet hose: 0.5 m Simple polyethylene pump for sucking low viscosity liquids. Not for aggressive chemicals. Pumping of liquid is done by squeezing the upper part of the pump. When liquid arrives, push the pump tube down to the bottom of the vessel and the liquid will self-clean. Easy to start with 6-7 pushes.
- Secure payment by card
- E-mail us, we reply swiftly!
- These rows can be edited \*
\* Edit these rows under Content > Article page
- Country of originIndia
Description
Article no.: 21315
Drum size: 5-20 L
Capacity: 6,5 LPM
Bung 2" use with drums
Discharge hose length 551 mm
Easy to use, polyethylene pump siphon liquids to lower
levels than the height at which the pump is installed
Easy to prime and start within 6-7 strokes.
Pump requires no further operation and keeps working
in Auto position
Equipped with a Vent Cap on top. Opening the cap stops
discharge
To dispense media at levels higher than the pump, pump
below needs to be continuously operated
Supplied complete with flexible corrugated discharge
tube
Recommended use: Water-based fluids, detergents,
waxes, soaps, antifreeze, some mild acids and other
liquids compatible with pump construction materials
Pump should only be used with light weight and non-
flammable liquids
Do NOT use with any media not compatible with
materials used in the pump construction
Warning
Pumps must never be used with Hot Media at
temperatures above 60° C
These pumps must never be used with concentrated
acids, Acetone, Benzene etc
Including components Polyethylene and PVC
Capacity: 6,5 LPM
Bung 2" use with drums
Discharge hose length 551 mm
Easy to use, polyethylene pump siphon liquids to lower
levels than the height at which the pump is installed
Easy to prime and start within 6-7 strokes.
Pump requires no further operation and keeps working
in Auto position
Equipped with a Vent Cap on top. Opening the cap stops
discharge
To dispense media at levels higher than the pump, pump
below needs to be continuously operated
Supplied complete with flexible corrugated discharge
tube
Recommended use: Water-based fluids, detergents,
waxes, soaps, antifreeze, some mild acids and other
liquids compatible with pump construction materials
Pump should only be used with light weight and non-
flammable liquids
Do NOT use with any media not compatible with
materials used in the pump construction
Warning
Pumps must never be used with Hot Media at
temperatures above 60° C
These pumps must never be used with concentrated
acids, Acetone, Benzene etc
Including components Polyethylene and PVC