Electric Oil Pump

Voltage : 230V AC
Flow: 14 to 16.6 LPM
Motor: 1/2 HP 220V AC, 50/60 Hz
Amp: 6
Rev/min: 1440

Mechanism: Gear pump
Suction pipe: 3/4" steel
Hose: 3/4" x 8"
Bung adaptor: 2" thread
Inlet thread: 1" NPT
Outlet thread: 3/4" NPT
Dispensing nozzle: Ball valve
Power cable length: 8"
Air-cooled
Max viscosity: SAE 90
Max working pressure: 4.5 bar
Thermal protection

Very strong oil pump with CE marking, especially for
large amounts of oil, hydraulic fluids, antifreeze or
antifreeze mixes.
Non-corroding aluminum die cast pump body.
A high horsepower to flow ratio assures adequate
power to pump viscous fluids at low temperatures.

Sintered powder metal gears.
Self-priming positive displacement design.
Pump has an internal by-pass valve to by-pass flow in
the discharge pressure exceeds by-pass valve setting.

Built-in 2" bung adapter for mounting directly onto
drums and tanks.
Includes filter screen that fits at the bottom of the
suction tube for use with waste oil.

The wetted parts:
Aluminum, steel, cast, iron, nylon, NBR, zink,
nitrile, polypropylene and PVC

Recommended use:
Oils, synthetic oils, antifreeze, used oil, hydraulic
fluids, cutting oils, oil based herbicides, non-
flammable oil based solvents, liquid soap etc.