Double Diaphragm Fuel Transfer Pump
£122.90
For 50 - 205 liter drums
Heavy Duty Fuel Transfer pump with discharge up
to 4 L / per 5 strokes, (800 ml/stroke)
Ideal for use where compressed air/power is not
easily available, such as farms/ranches, construction
sites, boat etc
Stainless steel Piston and fuel resistant hi-nitrile
rubber diaphragm
Includes a 2" die cast bung adapter and extra heavy
steel handle with security locking latch
Pump inlet fitted with easy to clean wire mesh screen
Complete with telescopic suction tube with non return
valve
- Secure payment by card
- E-mail us, we reply swiftly!
- These rows can be edited \*
\* Edit these rows under Content > Article page
Description
Article no.: 28060
Wetted component:
Aluminum, Steel, Stainless Steel, Poly Acetal and NBR
Recommended use:
Gasoline, Diesel fuel, Fuel Oil, Motor Oil and other
light petroleum products
Do not use: With corrosive liquids, solvents, acids,
alkalis, etc.
WARNING: Fuel containing Ethanol will cause more
frequent replacement of rubber parts
Do not use with Fuels with Ethanol content of greater
than 10%
Never operate the pump near fire or source of sparks
some chemicals may be explosive and dangerous to
pump
The pump is designed primarily for use with low
viscosity media. Pumping heavy fluids may cause
undue stress resulting in fracture
Note: Pump has a vent/air hole built-in which will
drain back any excess media into the drum
Aluminum, Steel, Stainless Steel, Poly Acetal and NBR
Recommended use:
Gasoline, Diesel fuel, Fuel Oil, Motor Oil and other
light petroleum products
Do not use: With corrosive liquids, solvents, acids,
alkalis, etc.
WARNING: Fuel containing Ethanol will cause more
frequent replacement of rubber parts
Do not use with Fuels with Ethanol content of greater
than 10%
Never operate the pump near fire or source of sparks
some chemicals may be explosive and dangerous to
pump
The pump is designed primarily for use with low
viscosity media. Pumping heavy fluids may cause
undue stress resulting in fracture
Note: Pump has a vent/air hole built-in which will
drain back any excess media into the drum