Electric Oil and Fuel Pump
£339.70
Vertical mounted oil and fuel pump designed for light
industrial, automotive, heating and marine application.
For use with non flammable media.
Pump has built-in adapter to fit directly onto drums
with a 2” threaded opening.
- Secure payment by card
- E-mail us, we reply swiftly!
- These rows can be edited \*
\* Edit these rows under Content > Article page
Description
Article no.: 21210
Made of chemically resistant materials. These
pumps work with a wide variety of low viscosity media.
Pump motor with double insulation for safe use with
water and emulsions.
Built-in anti-siphoning system ensures that the media
does not flow out by Siphon action incase of accidental
damage to the delivery hose or nozzle.
Operating time: Continuous
CE marked
Description: 230V AC, 50 Hz
Flow rate:* Up to 40 LPM
Motor: 0.43 HP / 0.32 kW centrifugal motor
Max viscosity of 114 cst/30 SAE
Suction hose: 3/4" x 1 m with strainer stainless steel
Delivery hose: 3/4" x 3 m
Tank adapter: 2" threaded
Inlet/Outlet: 3/4"
Nozzle: Manual polypropylene nozzle
Power cable: 2 m with plug
Water/dust protection: IPX-4
Noise level: 70 db
Wetted components: POM, polypropylene, stainless
steel, nitrile rubber, viton and PTFE.
Recommended use:
Diesel, kerosene,mineral and synthetic oils, antifreeze,
water, emulsions etc. Pump can be used with fluids
with a maximum viscosity of 144 cst/30 SAE.
Measured at pump outlet tested using diesel at 20°C.
Operating temperature -10° to +40° C.
WARNING: Do not use liquids with a flash point below
38° C as gasoline or alcohol.
Sparking could result in explosion causing fatal injury.